Dual XPR522 Informações Técnicas descarregar pdf (Página 12)

Revised May 15, 2006

7) The V-PDP Panel is an optional piece of equipment that provides system

administrators with convenient access to a microphone jack, V-CPU4 push

button inputs, and music inputs. It also provides a monitor function to listen to the

music sources prior to distribution. The panel is designed to mount in a 19”

equipment rack. In a competitive bid situation, you do not lose any system

functionality by excluding the V-PDP. The microphone input, music inputs and

pushbutton inputs are inherently available on all Valcom MultiPath systems.

8) The V-URI card is only required when a MultiPath system requires additional

push button inputs for special applications, call assurance LEDs or relays that will

be associated with stations (unlocking doors with electric locks for example).

9) In older versions of the MultiPath system design tool (version 2.03 or earlier),

when you choose self amplified speakers for a point, the system design tool

prompted you to choose power supplies for each point – this was necessary due

to the fact that the system design tool has no information as to where the points

would originate. If multiple one-way self-amplified speaker points are being

served from the MDF or from an IDF, it is perfectly valid to choose a single larger

supply to power all. This may result in a cost savings. The latest system design

tool is always available on our web site.

11) Ceiling speakers destined for installation into solid ceilings typically do not

require speaker bridges and backboxes. Unless these items are required by local

code or the project specification, they may be omitted from your equipment list.

12) The Valcom MultiPath package part numbers (V-PW24, V-TW24, ……etc.)

include the V-MPT programming tool, the required rack inserts or wall cabinets,

cables and head end equipment power supplies. These items do not need to be

added to your equipment list as separate items.

13) If your configuration is not using call buttons, it is unlikely that you will need a

V-DSP Large Display Kit for the office. Without call buttons, the V-DSP would

only indicate system date and time and outgoing call information.

Page 12 of 36

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

Sem comentários

Dual XPR522 Informações Técnicas Página 12